- 1 How far can the blind spot behind the bus extend?
- 2 How many blind spots are on a school bus?
- 3 How many mirrors are on a school bus?
- 4 Do shorter drivers have larger blind spots?
- 5 How many feet should you be able to see behind a school bus?
- 6 Which mirrors allow you to see directly in front of the bus?
- 7 How do school bus lights work?
- 8 Which mirror is used in buses?
- 9 What are convex mirrors on a school bus?
- 10 Why is a mirror convex?
- 11 What should you be looking for in your left flat mirror?
- 12 What affects the size of blind spots?
- 13 What are a truck’s blind spots called?
- 14 Where are the side blind spots on an 18 wheeler?
How far can the blind spot behind the bus extend?
The blind spot behind the bus extends 50 to 150 feet and could extend up to 400 feet depending on the length and width of the bus.
How many blind spots are on a school bus?
Every standard size school bus has four danger zones. These are areas most motorists refer to as “ blind spots ” because it’s almost impossible for the driver to see anything inside these zones.
How many mirrors are on a school bus?
5) There are two side-mounted flat mirrors, one on the right side of the bus and one on the drivers side. They are used to monitor traffic, check clearances and identify students on the sides and to the rear of the bus.
Do shorter drivers have larger blind spots?
Blind spots for shorter drivers tend to be significantly larger. In addition, the elevation of the driver’s seat, the shape of a vehicle’s windows and vehicle design can affect the size of the blind spots.
How many feet should you be able to see behind a school bus?
When a school bus is stopped with its red lights flashing and its stop arm extended, you must stop your vehicle at least 20 feet from the bus. Oncoming traffic and motorists approaching the bus from behind may not move until the stop arm is retracted and the red lights are no longer flashing.
Which mirrors allow you to see directly in front of the bus?
Crossover mirrors are used to help a school bus driver see the danger zone area directly in front of the bus, as well as the danger zone areas to the left and right sides of the bus, including the area from the front of the bus to the service door. 22.18 % of our users get this question wrong.
How do school bus lights work?
Bus Light System The two amber lights on both the front and the rear of each school bus are Warning Lights used just before the bus comes to a stop to load or unload children. The driver activates the amber lights in rural areas a distance of 500 feet from the stop.
Which mirror is used in buses?
Convex Mirrors As Rear-View Mirrors Convex mirrors are used as rearview mirrors in vehicles such as cars, buses, motorcycles, etc., These rear-view mirrors help the diver to check the vehicles and the traffic behind them. It also enables the driver to see large objects such as trucks, buses in small size.
What are convex mirrors on a school bus?
Convex mirrors are located near the flat mirrors and are used to monitor the left and right sides at a wide angle. These mirrors present an image that does not accurately reflect the size and distance from the bus.
Why is a mirror convex?
Convex mirrors are preferred in vehicles because they give an upright (not inverted), though diminished (smaller), image and because they provide a wider field of view as they are curved outwards. Convex mirrors make everything seem smaller but cover a larger area of surveillance.
What should you be looking for in your left flat mirror?
The left flat mirror There are 3 main things the driver must be able to see: 1 inch of the tire, the rear tire and 200 feet behind the bus. 2. The bus driver must be able to see a narrow strip of the bus measuring about 1”. Seeing 1” of the bus helps the driver determine alignment.
What affects the size of blind spots?
CONCLUSIONS—The size of scotomas depends on the surface topography of the tested area. The prominent nasal part of the optic disc appears less `blind’ than the shallow temporal part, probably because of more intensive light scattering by the prominent nasal part of the disc.
What are a truck’s blind spots called?
A truck’s blind spots are called No Zones. A No Zone is the area around the trucks where your car is no longer visible or you are so close that the truck can’t stop or maneuver safely. In both cases, when you are in a No Zone you are in much greater danger of getting into a collision.
Where are the side blind spots on an 18 wheeler?
Because of the massive size of 18-wheelers and other big commercial trucks, they have many blind spots. For instance, 18-wheelers have a blind spot at the front-end of the truck, on both sides; just below and behind the driver-side window; and directly behind the truck.