Readers ask: When Do You Not Need To Stop If A School Bus Is Loading Or Unloading Children?

When a school bus stops to load or unload children Vehicles traveling in the same direction as the bus must?

All vehicles must stop at least 10 feet upon meeting, from either direction, a school bus that is stopped for loading or unloading children and displays flashing lights and the stop signal arm. This rule does not apply if the bus is on the opposite roadway of a divided highway.

When should you stop for a stopped school bus quizlet?

Terms in this set (4) What should you do when approaching a school bus? When approaching a school bus that displays flashing red lights or a stop signal, the vehicle must come to a full stop and remain in this position while the bus is stopped.

You might be interested:  Question: When A School Bus Is Preparing To Stop:?

Do you have to stop for a bus on a 4 lane road in Texas?

According to Texas law, drivers must stop when a school bus extends its stop sign or turns on their flashing red lights. When a school bus is stopped, drivers must come to a complete stop on all lanes in both traveling directions; this is with the exception of a road with a raised median or barrier.

Which of the following is a recommended procedure when unloading students at school?

The recommended procedures are: Activate warning flasher system at least 100 feet prior to making a stop. Approach the loading zone slowly and carefully. Direct students to wait in an orderly fashion safely back from the roadway.

What does it mean when a school bus is stopped and it’s red lights are flashing?

FLASHING RED LIGHTS ON SCHOOL BUSES MEANS OTHER VEHICLES MUST STOP. A school bus stops to drop off children. These flashing lights mean the bus is picking up or discharging students and you need to STOP even on divided and multi-lane highways.

What is the first thing a driver should do after deciding to make a turn?

First you will need to stop at the stop line, make sure that you do not interfere with pedestrians, bicyclists, or vehicles moving on their green light, and make a turn. If a street has a left turn lane, you must use it when you turn left.

What does it mean when a school bus is stopped and it’s red lights are flashing quizlet?

Yes, you have to stop for a stopped school bus that has its red lights flashing whenever you come upon it from behind. It does not matter how many lanes the road has. A flashing red light at an intersection means: Stop and yield the right of way.

You might be interested:  FAQ: What Should You Look For During A Pre-trip Inspection Of School Bus?

What should you do if you are driving nearest stopped school bus with flashing lights?

When a school bus is stopped and flashing its red lights, drivers approaching from both directions must stop. This is because children are being loaded or unloaded. The drivers cannot proceed until the bus begins moving, or the bus driver signals to let vehicles pass, or the red lights are no longer flashing.

Do you have to stop for a school bus if there is a median in Texas?

Texas law mandates drivers must stop when a school bus extends its stop sign or turns on its flashing red lights. If the roadway is separated by a physical barrier (like a raised median for example) drivers do not have to stop for the school bus.

How many seconds down the road should you be looking?

In order to avoid last minute moves, you should look down the road 10 to 15 seconds ahead of your vehicle. A driver needs to look that far ahead to see hazards early. Constantly staring at the road just in front of your car is dangerous.

What do outside crossover mirrors allow a driver to see?

What do outside crossover mirrors allow a driver to see? Crossover mirrors are used to help a school bus driver see the danger zone area directly in front of the bus, as well as the danger zone areas to the left and right sides of the bus, including the area from the front of the bus to the service door.

What would you do before unloading passengers?

Turn on the upper, alternating red signal lights before stopping to load or unload your passengers. As soon as the bus is stopped, extend the stop arm and the pedestrian student safety crossing arm.

You might be interested:  Readers ask: How To Drive Past A School Bus?

What position should students be in front of the bus before they cross the roadway?

students. What position should students be in front of the bus before they cross the roadway? At least 10 feet in front of the right corner of the bumper, but still remaining away from the front of the school bus.

Which of the following is a reason to evacuate a school bus?

The driver must evacuate the bus when: • The bus is on fire or there is a threat of a fire. The bus is stalled on or adjacent to a railroad-highway crossing. The position of the bus may change and increase the danger. There is an imminent danger of collision.

Leave a Reply

Your email address will not be published. Required fields are marked *