Readers ask: How To Pass Missouri School Bus Pre Trip Inspection?

How many points do you need to pass a CDL pre-trip inspection?

The highest score possible is 80 points. The pre-trip inspection presents 15 defects, five of which are worth 12 points and 10 of which are worth four points. The highest score possible is 100 points. The skills test challenges drivers with six obstacles, or “problems,” each of which are worth up to 50 points.

What is checked in a pre-trip inspection?

A basic DOT pre-trip inspection includes checking your fluid levels, leaks, tires, 5th wheel, brakes, clutch, shock absorbers, ball joints, kingpins, gauges, lights, and more. Once you’ve completed a check of your truck, you can log your DOT pre-trip inspection in your log books and be on your way.

Is the pre trip inspection test hard?

Learning the vehicle inspection portion of the CDL test is difficult for many students. Passing the test requires each student to study and memorize the items tested. Drivers need to be able to point out a part, and describe what condition it is in.

How long does pre-trip take?

It is the driver’s responsibility to ensure the vehicle is safe for operation and is free from defects. Currently, there are no guidelines as to how long a pre-trip inspection should take. If you check everything you should be checking, a full inspection should take you approximately 30 to 50 minutes.

You might be interested:  FAQ: What Kind Of Cdl Do I Need To Drive A School Bus?

Is hitting a cone an automatic fail?

The first foot from the cone is zero points, the second foot is 4 points, the third foot is 8 points, and anything over that is an automatic fail. Hitting the cone would also be a fail. Exceeding the Speed Limit Speeding is an automatic fail.

When you do a walk around inspection you should check?

25. What are some things you should check on the front of your vehicle when doing the walk-around inspection?

  • Low beams, high beams, four way flashers, turn signals.
  • Tires, steering parts, suspension parts, headlights.
  • None of these.
  • Windshield, wipers, mirrors, hood latches.
  • Oil, transmission, air compressor, radiator.

What is the second thing you should do on a pre-trip inspection?

Next step for the pre-trip inspection is to check the side of the trailer and the tandems.

  • Wall – Make sure the wall is not damaged.
  • Lights – Lights should be on and flashing.
  • Tires – Tires should be properly inflated and have decent tread.
  • Hub seal – Make sure it’s not leaking and wiped with oil if transparent.

What three kinds of emergency equipment must you have?

What three kinds of emergency equipment must you have? Spare electrical fuses, three red reflective triangles, properly charged and rated fire extinguisher.

What do DOT officers look for?

The DOT official will inspect the driver’s documents including license, medical certificates, logs, HOS documentation, inspection reports, and Hazmat endorsements. The driver will also be checked to make sure they aren’t under the influence of any drugs, alcohol, or any other hazardous material.

Leave a Reply

Your email address will not be published. Required fields are marked *