Question: After Unloading At School Why Should You Walk Through The Bus?

What position should students be in front of the bus before they cross the roadway?

students. What position should students be in front of the bus before they cross the roadway? At least 10 feet in front of the right corner of the bumper, but still remaining away from the front of the school bus.

Where should students walk to after exiting the bus?

Where should students walk to after exiting the bus? bring the school bus to a full stop on the right side of the roadway, with the front bumper at least 10 feet away from students at the designated stop. This forces the students to walk to the bus, and that will give you a better view of their movements.

You might be interested:  How To Report A Bus Driver In Dekalb County School?

Under what conditions should you evacuate the bus?

The driver must evacuate the bus when: • The bus is on fire or there is a threat of a fire. The bus is stalled on or adjacent to a railroad-highway crossing. The position of the bus may change and increase the danger. There is an imminent danger of collision.

Which of the following is a recommended procedure when unloading students at school?

The recommended procedures are: Activate warning flasher system at least 100 feet prior to making a stop. Approach the loading zone slowly and carefully. Direct students to wait in an orderly fashion safely back from the roadway.

What is the primary purpose of the crossover mirror system on school buses?

Crossover mirrors are used to help a school bus driver see the danger zone area directly in front of the bus, as well as the danger zone areas to the left and right sides of the bus, including the area from the front of the bus to the service door.

How far does the danger zone extend around the bus minimum?

The danger zones are any area outside of the bus that extend as much as 15 feet from the front bumper, 15 feet from the left and right sides of the bus and 15 feet behind the rear bumper of the school bus. These areas are where children are in the most danger of being hit, either by another vehicle or their own bus.

What should you be looking for in your left flat mirror?

The left flat mirror There are 3 main things the driver must be able to see: 1 inch of the tire, the rear tire and 200 feet behind the bus. 2. The bus driver must be able to see a narrow strip of the bus measuring about 1”. Seeing 1” of the bus helps the driver determine alignment.

You might be interested:  Quick Answer: How Many Miles Away To Live To Get School Bus?

How many mirrors does a school bus have?

There are many more mirrors on a school bus than on a car. Buses have 7 mirrors; one interior rearview mirror and 6 external mirrors (3 to monitor each side.)

What is the purpose of the black lines on a school bus?

Along with giving the school bus its unique look, they also serve a very important purpose. Those black stripes are there to help protect the children in the event of a collision. They are known as “rub rails” and they also stop a car that hits the side of the bus from harming the entire side of the vehicle.

How do you evacuate a bus?

Evacuation Procedure

  1. Park the bus as close to the shoulder of the road as possible.
  2. Stand facing the rear of the bus.
  3. Give the command: “Remain seated; prepare to evacuate.”
  4. Turn toward the front of the bus.
  5. Move backwards to the first occupied seat.
  6. Starting with either the left or the right seat:

How do you evacuate a school bus?

Park the bus as close to the shoulder of the road or safe zone as quick as possible • Turn hazard lights on. Set the parking brake. Turn the engine off. bus is on the side, use the roof hatches as well as the emergency doors on the up side to evacuate students.

How far does the danger zone?

Define the danger zone: how far does the danger zone extend around the bus? The danger zones may extend as much as 30 feet from the front bumper with the first 10 feet being the most dangerous, 10 feet from the left and right sides of the bus and 10 feet behind the rear bumper of the school bus.

You might be interested:  Question: What Class License To Drive A School Bus?

What would you do before unloading passengers?

Turn on the upper, alternating red signal lights before stopping to load or unload your passengers. As soon as the bus is stopped, extend the stop arm and the pedestrian student safety crossing arm.

When stopping to pick up students a bus driver should?

When stopping to pick up students, a school bus should be put in park. If the transmission does not have a park shift point, the vehicle should instead be placed in neutral.

When a school bus is loading or unloading students you do not need to stop?

You must stop at least thirty feet from a stopped school bus that is loading or unloading children. This is required by law whether you are meeting the bus or traveling behind it.

Leave a Reply

Your email address will not be published. Required fields are marked *