Question: 6) What Are The Four (4) Required Mirrors On A School Bus?

What are the mirrors on a school bus?

These mirrors are mounted at the left and right front corners of the bus at the side or front of the windshield. They are used to monitor traffic, check clearances and students on the sides and to the rear of the bus.

How many mirrors are on a school bus?

5) There are two side-mounted flat mirrors, one on the right side of the bus and one on the drivers side. They are used to monitor traffic, check clearances and identify students on the sides and to the rear of the bus.

Which mirror is used in buses?

Convex Mirrors As Rear-View Mirrors Convex mirrors are used as rearview mirrors in vehicles such as cars, buses, motorcycles, etc., These rear-view mirrors help the diver to check the vehicles and the traffic behind them. It also enables the driver to see large objects such as trucks, buses in small size.

You might be interested:  Quick Answer: What Does School Bus Made From?

Which mirrors allow you to see directly in front of the bus?

Crossover mirrors are used to help a school bus driver see the danger zone area directly in front of the bus, as well as the danger zone areas to the left and right sides of the bus, including the area from the front of the bus to the service door. 22.18 % of our users get this question wrong.

How far in front of a bus Hood does a blind spot extend?

The blind spot behind the bus can extend up to 400 feet depending on the length and width of the bus. The blind spot behind the bus extends 50 to 150 feet and could extend up to 400 feet depending on the length and width of the bus.

Why is a mirror convex?

Convex mirrors are preferred in vehicles because they give an upright (not inverted), though diminished (smaller), image and because they provide a wider field of view as they are curved outwards. Convex mirrors make everything seem smaller but cover a larger area of surveillance.

What should you be looking for in your left flat mirror?

The left flat mirror There are 3 main things the driver must be able to see: 1 inch of the tire, the rear tire and 200 feet behind the bus. 2. The bus driver must be able to see a narrow strip of the bus measuring about 1”. Seeing 1” of the bus helps the driver determine alignment.

Which mirror is used in street light?

A plane mirror is used in a microscope, mirror tiles, for signaling and periscopes. Hence, comparing all the given options, it can be concluded option B is correct; a street light bulb uses the convex mirror as reflectors.

You might be interested:  Often asked: How Is The Nys School Bus Skills Test Scored?

Which mirror is used in homes?

Plane mirrors are used in homes.

Which mirror is used in telescope?

The Reflecting Telescope or Reflector uses a concave mirror as the telescope’s Primary Objective, rather than a lens or lenses. The type of reflector depends on other system mirror(s), called the Secondary Mirror.

What is the primary purpose of the crossover mirror system on school buses?

Crossover mirrors are used to help a school bus driver see the danger zone area directly in front of the bus, as well as the danger zone areas to the left and right sides of the bus, including the area from the front of the bus to the service door.

Which of the following are reasons why properly adjusting the school buses outside mirrors is important?

Mirrors should be adjusted every time before driving the bus to in sure that the driver has the maximum viewing area. Marriage should be adjusted so that the driver can observe the danger zone around the bus.

How do you know if your convex mirrors are properly adjusted?

An outside convex mirror is properly adjusted if: A. The driver can see at least one lane of traffic and the entire side of the bus.

Leave a Reply

Your email address will not be published. Required fields are marked *